Aller au contenu principal

Outils recommandés dans ce démontage

Introduction

Today we will be tearing down the JBL Clip 1 and looking at its components

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre JBL Clip 1, utilisez notre manuel de réparation.

  1. Starting with the main side of the speaker, turn it over so that the back side is visible. Starting with the main side of the speaker, turn it over so that the back side is visible.
    • Starting with the main side of the speaker, turn it over so that the back side is visible.

  2. Pull off the rubber ring on the underside of the speaker so that the screws are visible. Unscrew the small phillips screws.
    • Pull off the rubber ring on the underside of the speaker so that the screws are visible.

    • Unscrew the small phillips screws.

  3. Firmly pull the back cover off of the device.
    • Firmly pull the back cover off of the device.

    • Begin to unscrew the screws holding the front of the speaker in place.

  4. After unscrewing the 3 screws on the inside turn the speaker over so that the front is placing you. Using a prying tool, pull up on the rim of the speaker front. Using a prying tool, pull up on the rim of the speaker front.
    • After unscrewing the 3 screws on the inside turn the speaker over so that the front is placing you.

    • Using a prying tool, pull up on the rim of the speaker front.

  5. Pull up to reveal the other side of the speaker chip and the speaker component itself. Be careful of the wire connecting the speaker to the board as too much pressure may cause it to snap.
    • Pull up to reveal the other side of the speaker chip and the speaker component itself.

    • Be careful of the wire connecting the speaker to the board as too much pressure may cause it to snap.

  6. Unscrew the speaker connecting to the front piece of plastic. Pull the speaker off of the front piece.
    • Unscrew the speaker connecting to the front piece of plastic.

    • Pull the speaker off of the front piece.

  7. Teardown is fully finished. There are only 5 main seperate components to the speaker! Teardown is fully finished. There are only 5 main seperate components to the speaker! Teardown is fully finished. There are only 5 main seperate components to the speaker!
    • Teardown is fully finished. There are only 5 main seperate components to the speaker!

Timothy McEvoy

Membre depuis le 21/01/2018

750 Réputation

1 tutoriel rédigé

Équipe

Master Techs Membre de l'équipe Master Techs

Community

290 membres

827 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 15

30 derniers jours : 72

Total : 1,226