Réparez vos affaires Communauté Boutique

LG G Watch R Teardown

Rédigé par : Dustin Richards (et 3 autres contributeurs)
Publication : January 20, 2015
  • Commentaires : 8
  • Favoris : 19
  • Vues : 20,2k

LG G Watch R Teardown

Rédigé par : Dustin Richards (et 3 autres contributeurs)
Publication : January 20, 2015
  • Commentaires : 8
  • Favoris : 19
  • Vues : 20,2k

Vue éclatée

Introduction

This is a simple teardown of the LG G watch R.

Ce dont vous avez besoin

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre LG G Watch R, utilisez notre manuel de réparation.

  1. LG G Watch R Teardown, Front and Back: étape 1, image 1 de 2 LG G Watch R Teardown, Front and Back: étape 1, image 2 de 2

    • LG G Watch R assembly.

    Traduire

  2. LG G Watch R Teardown, Removing the back cover: étape 2, image 1 de 2 LG G Watch R Teardown, Removing the back cover: étape 2, image 2 de 2

    • First remove the watch band using a small flat screw driver to compress the spring loaded pin.

    • Remove the four T4 torx screws (Green).

    • Carefully pry the base off using a thin flat screw driver

    Traduire

  4. LG G Watch R Teardown, Removing the Board: étape 3, image 1 de 2 LG G Watch R Teardown, Removing the Board: étape 3, image 2 de 2

    • Disconnect the four electrical connectors from the board

    • Orange - Battery connector

    • Blue - button and charging connector

    • Green - Backlight

    • Purple - O-LED Controller + Mic

    • Remove the three phillips screws securing the board down. Then lift the board off the base

    Traduire

  5. LG G Watch R Teardown, The Battery: étape 4, image 1 de 2 LG G Watch R Teardown, The Battery: étape 4, image 2 de 2

    • The battery is below the board.

    • The battery can easily be pried out using a small flat head screwdriver.

    Traduire

  6. LG G Watch R Teardown, Battery housing: étape 5, image 1 de 1

    • Using a small pliers and a small flat screwdriver the battery housing comes out easily.

    Traduire

  7. LG G Watch R Teardown, P-OLED Panel: étape 6, image 1 de 3 LG G Watch R Teardown, P-OLED Panel: étape 6, image 2 de 3 LG G Watch R Teardown, P-OLED Panel: étape 6, image 3 de 3

    • Pictures of the front and back of the 1.3" P-OLED.

    • The screen is glued in.

    Traduire

Auteur

avec 3 autres contributeurs

Dustin Richards

Membre depuis le 01/20/15

332 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

8 commentaires

Is there a wifi antenna inside the LG G watch R?

Fernando Perez - Réponse

Yes, there is a WiFi antenna inside the LG G Watch R, however WiFi functionality was only recently added to the G Watch R in a more recent update via Android Wear.

Mark Fortune -

Are there differences between the UK as US G Watch R?

James Kemble - Réponse

Where could I find a battery for replacement?

Thanks in advance.

Fab - Réponse

Any tips for what to check if the touchscreen turns on but is non-responsive ?

richard - Réponse

hi, have you found a solution? on my watch everything works except the touch screen….when you touch it or move your arm it turns off….if you put your palm on the screen istead of turning off it goes on

Tony Forandroid -

Ha lezárt a kijelző de nem tudom a kódot lehet valamit tenni?? :(

ndavidattila - Réponse

Hi could you post the watch cradle wiring diagram.

I bought non original cradle, and it only can charge, no data connection

Ippo - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 15

Total : 20,258