Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
First remove the watch band using a small flat screw driver to compress the spring loaded pin.
-
Remove the four T4 torx screws (Green).
-
Carefully pry the base off using a thin flat screw driver
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the four electrical connectors from the board
-
Orange - Battery connector
-
Blue - button and charging connector
-
Green - Backlight
-
Purple - O-LED Controller + Mic
-
Remove the three phillips screws securing the board down. Then lift the board off the base
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The battery is below the board.
-
The battery can easily be pried out using a small flat head screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a small pliers and a small flat screwdriver the battery housing comes out easily.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pictures of the front and back of the 1.3" P-OLED.
-
The screen is glued in.
-
8 commentaires
Is there a wifi antenna inside the LG G watch R?
Yes, there is a WiFi antenna inside the LG G Watch R, however WiFi functionality was only recently added to the G Watch R in a more recent update via Android Wear.
Are there differences between the UK as US G Watch R?
hi, have you found a solution? on my watch everything works except the touch screen….when you touch it or move your arm it turns off….if you put your palm on the screen istead of turning off it goes on
Ha lezárt a kijelző de nem tudom a kódot lehet valamit tenni?? :(
