Outils recommandés dans ce démontage

Introduction

LG Versa is one of the first all touchscreen cell phones that Verizon Wireless sells. The Versa is the sister phone to the LG Dare. The phone comes with a 2.0 megapixel camera with a flash. The Versa has a 3" touchscreen and a 3D graphic interface.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre LG Versa, utilisez notre manuel de réparation.

Insert wisdom here.
  • Insert wisdom here.

Ajouter un commentaire

LG Versa has a 3" touchscreen with a call, power, and clr button on the front.
  • LG Versa has a 3" touchscreen with a call, power, and clr button on the front.

  • On left side you will find the volume control buttons and camera button. Also, the charger port.

  • On the other side you will find the microSD or microSDHC slot.

Ajouter un commentaire

  • The LG Versa has a 2.0 megapixel camera with a LED flash on the back

Ajouter un commentaire

  • On the right hand side of the LG Versa there is a latch to open up the back of the cell phone. Push the latch up and lift off the back of the phone exposing the battery.

Ajouter un commentaire

  • Simply insert your finger in between the slot and the battery and push down and up to remove the battery.

Ajouter un commentaire

  • Six Phillips screws holding down the battery housing (Circled in the picture). Unscrew the six screws and put them aside.

Ajouter un commentaire

  • Insert a safe prying tool between the slot between the front screen housing and the battery housing to remove the battery housing.

Ajouter un commentaire

  • In the bottom right corner of the logic board, disconnect the button connector with tweezers or a prying tool.

Ajouter un commentaire

  • Use a prying tool to safely lift up the logic board from the logic board housing

  • The logic board is connected to the speaker and the LCD screen from the back. Do not lift the logic board too high or you will have to replace the LCD screen and the speaker.

Ajouter un commentaire

  • The LCD screen is connected to the bottom of the logic board. Once you lift the logic board use tweezers or a safe prying tool to disconnect the ribbon wire from the LCD screen to the logic board.

Ajouter un commentaire

  • Lift the logic board carefully and use a safe prying tool and tweezers to remove the speaker.

  • The speaker is attached to the housing with a rubber adhesive be careful not to rip the wire from the logic board and the speak apart

Ajouter un commentaire

  • In the top right corner of the housing use a pry tool to disconnect the touch screen digitizer connector from the housing.

Ajouter un commentaire

  • Removing the logic board housing from the front housing is the most difficult part of the tear down.

  • Start on the side with the volume control buttons and use a safe pry tool to separate both housings.

Ajouter un commentaire

  • Use the safe pry tool around the perimeter of the phone until you are able to separate both housing apart.

  • Remove the Lock, Volume, and Front buttons from the housing.

Ajouter un commentaire

  • Simply lift the LCD screen from the logic board housing to remove the LCD screen.

Ajouter un commentaire

  • Congratulations you have fully torn down the LG Versa.

Ajouter un commentaire

Stefan Yap

Membre depuis le 03/03/2011

29 Réputation

3 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 5,996