Aller au contenu principal

Outils recommandés dans ce démontage

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Lexmark Z11, utilisez notre manuel de réparation.

  1. Be sure to remove the power cord and all other connections to and from the device. Remove easily detachable parts.
    • Be sure to remove the power cord and all other connections to and from the device.

    • Remove easily detachable parts.

  2. To remove the cover and housing use a screw driver to remove the highlighted screws.
    • To remove the cover and housing use a screw driver to remove the highlighted screws.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Additionally, remove those two screws at the bottom of the device.
    • Additionally, remove those two screws at the bottom of the device.

  5. Press the nib marked in green inside and slightly lift the housing from the back plate shown in the first image here. The housing can be removed by lifting and rotating it around the catches on the lower front side of the device highlighted in purple. Finally, it is shifted slightly to the front out of those catches.
    • Press the nib marked in green inside and slightly lift the housing from the back plate shown in the first image here.

    • The housing can be removed by lifting and rotating it around the catches on the lower front side of the device highlighted in purple. Finally, it is shifted slightly to the front out of those catches.

  6. With this inner part nearly everything is easily accessible. There are two stepper motors: NMB PM42L-048-FEA8 4 wires
    • With this inner part nearly everything is easily accessible. There are two stepper motors:

    • NMB PM42L-048-FEA8

    • 4 wires

    • Mitsumi H9601

    • 5 wires, can probably be resoldered to use 4 or 6 wires

    • There is also an electronics board as well as smaller useful parts like buttons, LEDs, light barriers.

    • Motorola XC901051FTA

    • Motorola 34063 (switching voltage regulator)

  7. The motors in detail. The motors in detail. The motors in detail.
    • The motors in detail.

raumschaum

Membre depuis le 27/02/2013

371 Réputation

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,056