Menu 

Vos paramètres

Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils
Mon panier (US Store)

On dirait que votre panier est vide

Parcourez notre boutique

Linksys BEFW11S4 Teardown

Rédigé par : William (et 5 autres contributeurs)
Publication : April 18, 2010
  • Commentaires : 2
  • Favoris : 7
  • Affichages : 8,5k

Vue éclatée

Outils recommandés dans ce démontage

Acheter ces outils

Introduction

This wireless router stopped working, so I wanted to take a look at it's innards.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Linksys BEFW11S4, utilisez notre manuel de réparation.

  1. Waiting to be disassembled...

    • Waiting to be disassembled...

    Modifier

  2. Remove antennas. Remove nuts and washers around antenna connectors. Push in antenna connectors.

    • Remove antennas.

    • Remove nuts and washers around antenna connectors.

    • Push in antenna connectors.

    Modifier

  3. Remove feet (with flat-head screwdriver, fingernails, etc). Unscrew the screws. Unscrew the screws.

    • Remove feet (with flat-head screwdriver, fingernails, etc).

    • Unscrew the screws.

    Modifier

  4. Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant

  5. Pull apart blue front from black back with a LOT of force. Slide and pull up bottom. (Make sure the antenna connectors get through.)

    • Pull apart blue front from black back with a LOT of force.

    • Slide and pull up bottom. (Make sure the antenna connectors get through.)

    Modifier

  6. Twist and pull out antenna connector feeds.

    • Twist and pull out antenna connector feeds.

    Modifier

  7. Pull up RF shield from motherboard. Unscrew the motherboard from the bottom. Push the motherboard forward (as in this picture) to unlatch it from the bottom.

    • Pull up RF shield from motherboard.

    • Unscrew the motherboard from the bottom.

    • Push the motherboard forward (as in this picture) to unlatch it from the bottom.

    Modifier

  8. Some people have a card where you have to unscrew it. If that is your case, do that. The instructions below is for my type of router. Push the card forward to deattach the pins.

    • Some people have a card where you have to unscrew it. If that is your case, do that. The instructions below is for my type of router.

    • Push the card forward to deattach the pins.

    • Remove the card from the metal holdster.

    Modifier

  9. Here are the markings on the motherboard chips. If you have any info on these chips, please comment!

    • Here are the markings on the motherboard chips. If you have any info on these chips, please comment!

    • Macronix 29F040QC-90

    • ISSI IS41C16100S-50K

    • SAMSUNG ARM S3C4510X01-QERO

    • RMC RTL8019AS

    • Bothhands FB2022

    • Bothhands 40ST1041E

    • Kendin KS8995. Kendin has since been bought by Micrel.

    Modifier

  10. Enjoy!

    • Enjoy!

    Modifier

Auteur

avec 5 autres contributeurs

William

Membre depuis le 18/04/2010

65 Réputation

1 tutoriel rédigé

Badges: 1

2 commentaires

Ajouter un commentaire

what is that card inside this router

hartiTube - Réponse

Thank you. I accomplished this task. Except my antenna wires were soldered to the board.

Darren - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 8,540