Aller au contenu principal

Ce démontage est en cours – Recharger périodiquement pour voir les derniers changements !

Outils recommandés dans ce démontage

Introduction

How to take apart the M6013 Capacitor Meter

  1. Remove the circled screw Remove battery case and batteries
    • Remove the circled screw

    • Remove battery case and batteries

  2. Remove circled screws Pull case apart Watch out for buttons, they will fall out easily.
    • Remove circled screws

    • Pull case apart

    • Watch out for buttons, they will fall out easily.

  3. Remove circled screws Be careful when removing the circuit board, the battery cable is still connected. Unsolder the square locations either on the circuit board or the case to fully remove the circuit board
    • Remove circled screws

    • Be careful when removing the circuit board, the battery cable is still connected.

    • Unsolder the square locations either on the circuit board or the case to fully remove the circuit board

  4. Location of microprocessor Location of microprocessor
    • Location of microprocessor

  5. Remove the cable connector Remove Display
    • Remove the cable connector

    • Remove Display

Ted Hsueh

Membre depuis le 20/09/2012

170 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 16-56, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 16-56, Forte Fall 2012

CPSU-FORTE-F12S16G56

5 membres

7 tutoriels rédigés

Add some specs on start and foto of the unit ....

Mateusz Bonkowski - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 363