Aller au contenu principal

Outils recommandés dans ce démontage

Introduction

Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Mouse, utilisez notre manuel de réparation.

  1. Rotate mouse over and locate Trackball cover Using index fingers and thumb, rotate counter-clockwise Using index fingers and thumb, rotate counter-clockwise
    • Rotate mouse over and locate Trackball cover

    • Using index fingers and thumb, rotate counter-clockwise

  2. After the Trackball cover has been rotated, pry the lid off using fingernails. Remove Trackball cover and place to the side. Angle mouse to eject Trackball from the casing.
    • After the Trackball cover has been rotated, pry the lid off using fingernails.

    • Remove Trackball cover and place to the side.

    • Angle mouse to eject Trackball from the casing.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside. Lift the two cases apart and place screw to the side. Lift the two cases apart and place screw to the side.
    • Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.

    • Lift the two cases apart and place screw to the side.

  5. Remove the wire from the plastic casing near the top of the mouse. Lift up to remove the PCB which is attached to the mouse. Place case to the side.
    • Remove the wire from the plastic casing near the top of the mouse.

    • Lift up to remove the PCB which is attached to the mouse.

    • Place case to the side.

  6. Locate where the wire is connected to the PCB via the white connection. Pry the connections apart and place the cable to the side. Pry the connections apart and place the cable to the side.
    • Locate where the wire is connected to the PCB via the white connection.

    • Pry the connections apart and place the cable to the side.

Kevin Gingrich

Membre depuis le 06/10/2011

180 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 20-28, Maness Fall 2011 Membre de l'équipe Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 membres

7 tutoriels rédigés

Wow! Someone really worked hard on this guide. Kudos sir.

Tushar Varshney - Réponse

Yes sir I won't know everything about the machine

mubarak wad gab tagel - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 21

Total : 3,112