Aller au contenu principal

Introduction

This is my tear down of the Razer Blade 14. I haven't yet seen anyone dismantle this notebook so i decided to give it as try and went as far as I felt comfortable going.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Razer Blade 14" (2013), utilisez notre manuel de réparation.

  1. The thin and sleek gaming Notebook from Razer. The thin and sleek gaming Notebook from Razer.
    • The thin and sleek gaming Notebook from Razer.

  2. Remove the 10 Screws holding the back Cover on to reveal the mainboard. DDR3 Ram chips CPU Chipset
    • Remove the 10 Screws holding the back Cover on to reveal the mainboard.

    • DDR3 Ram chips

    • CPU Chipset

    • Liteon 256gb SSD (factory installed)

    • Factory WLAN/BT card

    • Battery

    • Aftermarket MSata SSD (installation screw not included)

  3. Removing the Battery Removing the Battery Removing the Battery
    • Removing the Battery

  4. Apparently this notebook was named even before i got it! In my use this battery will last through 4-5 hours of movies on power saver mode. Apparently this notebook was named even before i got it! In my use this battery will last through 4-5 hours of movies on power saver mode. Apparently this notebook was named even before i got it! In my use this battery will last through 4-5 hours of movies on power saver mode.
    • Apparently this notebook was named even before i got it! In my use this battery will last through 4-5 hours of movies on power saver mode.

  5. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  6. Removing the Speakers. Removing the Speakers.
    • Removing the Speakers.

  7. The original mSATA SSD. (the secondary seen earlier was added by myself. The original mSATA SSD. (the secondary seen earlier was added by myself. The original mSATA SSD. (the secondary seen earlier was added by myself.
    • The original mSATA SSD. (the secondary seen earlier was added by myself.

  8. Removing the fans. Removing the fans. Removing the fans.
    • Removing the fans.

  9. Removing the heatsinks. Removing the heatsinks. Removing the heatsinks.
    • Removing the heatsinks.

  10. Removing the mainboard. Removing the mainboard. Removing the mainboard.
    • Removing the mainboard.

  11. This is the end of the teardown. anything past this point would likely cause damage to the notebook and as i intend to continue using it, this would be undesirable. Just one thing i noticed, that there is an debug ribbon cable plug left on the board, another thing, the power plug is replaceable. This is the end of the teardown. anything past this point would likely cause damage to the notebook and as i intend to continue using it, this would be undesirable. Just one thing i noticed, that there is an debug ribbon cable plug left on the board, another thing, the power plug is replaceable. This is the end of the teardown. anything past this point would likely cause damage to the notebook and as i intend to continue using it, this would be undesirable. Just one thing i noticed, that there is an debug ribbon cable plug left on the board, another thing, the power plug is replaceable.
    • This is the end of the teardown. anything past this point would likely cause damage to the notebook and as i intend to continue using it, this would be undesirable. Just one thing i noticed, that there is an debug ribbon cable plug left on the board, another thing, the power plug is replaceable.

tallme15

Membre depuis le 09/03/2013

794 Réputation

2 tutoriels rédigés

41 commentaires

Great work, very, very professional ! And thanks, was really curious to see how one looks on the inside !

Darie H - Réponse

Awsome Teardown! Thanks A bunch!

my91331 - Réponse

Thanks a bunch everyone! With all the recognition I've gotten with this teardown I decided I would redo it with pictures taken on a proper DSLR and more of them and more indepth captions for the individual steps, I may even make some replacement guides!

tallme15 - Réponse

Is that a second mSATA slot I see on the left side of the motherboard underneath the large ribbon cable?

Bryce - Réponse

Indeed it is! it functions too, the stock is beneath the cable, the unpopulated is the exposed one, that i had installed an Mushkin atlas in and started using without a hitch.

tallme15 -

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 4

7 derniers jours : 35

30 derniers jours : 159

Total : 53,359