Aller au contenu principal

SYNOLOGY DS718+ Teardown

  1. SYNOLOGY DS718+ Teardown, Case presentation:  front panel: étape 1, image 1 de 1
    • This NAS DS718 + is equipped with 4 GB of RAM (6 GB max.), an INTEL Celeron J3455 64-bit Quad processor, two bays for SATA drives (HDD, or SSD).

    • FRONT PANEL : you can notice on the right side, disks LEDs disapeared. You can find them now just on the top of the disk bays.

    • status LEDs

    • power buton (startup / shutdown)

    • 1 x USB 3 port

    • "copy" buton

    • 2 x disk support (caddy / cage)

    • disk bay lock

  2. SYNOLOGY DS718+ Teardown, Cas presentation: rear panel: étape 2, image 1 de 1
    • REAR PANEL

    • 1 x 92mm fan

    • 2 x EHTERNET RJ45 Gigabit port

    • 2 x USB 3 port

    • 1 x eSATA port

    • 1 x power connector

    • 1 x Kensington security incision (K-lock)

    • RESET buton

    1 x ventilateur 80 cm ? c’est un peu gros, non ? =))

    en fait, c’est un 92mm comme le dit Synology et comme le dit mon mètre à l’arrière de mon 718 +

    ps : vous pouvez supprimer ce message quand ma modification sera validée. Cordialement

    Belnea - Réponse

  3. SYNOLOGY DS718+ Teardown, Backplane and memory access: étape 3, image 1 de 3 SYNOLOGY DS718+ Teardown, Backplane and memory access: étape 3, image 2 de 3 SYNOLOGY DS718+ Teardown, Backplane and memory access: étape 3, image 3 de 3
    • Before teardown, unlock the disk media with the key.

    • It's a new appreciable feature, the memory slots are now directly reachable.

    • first memory slot

    • seonc memory slot (not populated)

    • The previous revision (DS716+ II) allowed this operation but a piece of metal prevent to remove memory.

  4. SYNOLOGY DS718+ Teardown, Teardown: Rear Panel - Step 1 / 3: étape 4, image 1 de 3 SYNOLOGY DS718+ Teardown, Teardown: Rear Panel - Step 1 / 3: étape 4, image 2 de 3 SYNOLOGY DS718+ Teardown, Teardown: Rear Panel - Step 1 / 3: étape 4, image 3 de 3
    • 1 - Remove the two screws placed under the NAS, on rear side.

    • 2 - Remove the screw placed in the middle of the rear panel.

  5. SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 2 / 3: étape 5, image 1 de 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 2 / 3: étape 5, image 2 de 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 2 / 3: étape 5, image 3 de 3
    • To remove the rear panel …

    • slightly pull the lower part of the rear panel so that the lugs do not touch the case, then ...

    • drag the facade upwards …

    • The back cover is held by two notches into the case.

  6. SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 3 / 3: étape 6, image 1 de 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 3 / 3: étape 6, image 2 de 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 3 / 3: étape 6, image 3 de 3
    • Once removed, remove the fan connector from the motherboard.

  7. SYNOLOGY DS718+ Teardown, Removing the Metal Housing: étape 7, image 1 de 3 SYNOLOGY DS718+ Teardown, Removing the Metal Housing: étape 7, image 2 de 3 SYNOLOGY DS718+ Teardown, Removing the Metal Housing: étape 7, image 3 de 3
    • Once the rear panel is removed, the housing can be removed. To do so drag the cover about 1 cm to the back of the NAS then lift the hood upwards.

  8. SYNOLOGY DS718+ Teardown, Naked case before disassembling metal housing: étape 8, image 1 de 3 SYNOLOGY DS718+ Teardown, Naked case before disassembling metal housing: étape 8, image 2 de 3 SYNOLOGY DS718+ Teardown, Naked case before disassembling metal housing: étape 8, image 3 de 3
    • Now remains the front to remove ...

    • Here are some photographs of the case and the internal structure + screws.

  9. SYNOLOGY DS718+ Teardown, Teradown: front panel - step 1 / 2: étape 9, image 1 de 3 SYNOLOGY DS718+ Teardown, Teradown: front panel - step 1 / 2: étape 9, image 2 de 3 SYNOLOGY DS718+ Teardown, Teradown: front panel - step 1 / 2: étape 9, image 3 de 3
    • Remove the two screws under the box on the front side and then ...

    • in the same way as for the rear panel, lift the hood slightly ...

  10. SYNOLOGY DS718+ Teardown, Teardown: front panel - step 2 / 2: étape 10, image 1 de 2 SYNOLOGY DS718+ Teardown, Teardown: front panel - step 2 / 2: étape 10, image 2 de 2
    • and remove the front panel …

  11. SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 1/3: étape 11, image 1 de 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 1/3: étape 11, image 2 de 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 1/3: étape 11, image 3 de 3
    • x 4 screws to remove …

    • x 2 on the right side panel

    • and x 2 on the upper part

  12. SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 2/3: étape 12, image 1 de 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 2/3: étape 12, image 2 de 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 2/3: étape 12, image 3 de 3
    • This part is delicate to assembly as to disassembly. Read full instructions carefully before handling.

    • The guidance remains relatively accurate but the connector for the LED card drives is fragile. Do not force when removing or inserting the side flange.

    • electronic card LED disks

    • riser for SATA backplane (electronic card or daughter card)

    • electronic card riser (USB and e-SATA)

  13. SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 3/3: étape 13, image 1 de 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 3/3: étape 13, image 2 de 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 3/3: étape 13, image 3 de 3
    • INSTRUCTIONS :

    • use both hands ...

    • pull gradually ...

    • everything must come without forcing!

    • Pay attention also to the metallic tape ... take it off if possible!

  14. SYNOLOGY DS718+ Teardown, Teardown: motherboard and memory: étape 14, image 1 de 2 SYNOLOGY DS718+ Teardown, Teardown: motherboard and memory: étape 14, image 2 de 2
    • motherboard (processor side)

    • memory card

    • last pictures are bad …

Conclusion

To reassemble your device, follow the instructions in reverse order.

4 autres ont terminé cette réparation.

Merci à ces traducteurs :

fr en

100%

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Sébastien

Membre depuis le 12/14/15

4 030 Réputation

6 tutoriels rédigés

Équipe

AEM (ANIMA EX MACHINA) Membre de l'équipe AEM (ANIMA EX MACHINA)

Business

1 membre

14 tutoriels rédigés

4 commentaires

1 hour? I did it in 20 minutes that's teardown and reassembly!!?!

Ken Richner - Réponse

PLZ read the introduction more carefully !

Sébastien -

How to replace a larger heat pipe radiator??

love3kkk - Réponse

Any suggestions on Mother board update for the DS218+ & DS718+ ?

WA FOR SALE - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 20

30 derniers jours : 106

Total : 7,563