Outils recommandés dans ce démontage

Introduction

We disassembled this calculator on April 17, 2010.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Sanyo CX 110, utilisez notre manuel de réparation.

    • Here is the Sanyo CX 110 calculator.

    Ajouter un commentaire

  1. Now that we removed the back of the calculator, here is the battery and the back of the logic board.
    • Now that we removed the back of the calculator, here is the battery and the back of the logic board.

      • Sanyo Tight-Seal Power-Up Sum-3 1.5V AA battery.

      • Positive contact for the battery.

      • Negative contact for the battery.

    Ajouter un commentaire

    • Remove these 7 screws using a razor blade.

    • Be careful not to break the razor blade because it is fragile.

    • Turn the circuit board 180 degrees after removing screws.

    Ajouter un commentaire

    • You will now see the circuit board and the buttons. Remove the buttons for the calculator.

    Ajouter un commentaire

    • Now we're all done! Just take the LCD apart and you are done completely!

      • Sum-3 Sanyo Battery.

      • LCD Screen Parts (darkener, inverter, LCD screen.

      • Circuit Board for the calculator.

      • Buttons for the calculator (square root, memory, percent, operators, numbers, etc.)

      • Housing for the calculator.

    okay teardown. My only advice is DON'T use the flash. I can barly see some of the pictures because of it. Use natural sun lighting or even a set of lamps spaced approaply. instead. Other than that, good attempt.

    Nicholas Ouimet - Réponse

samhnri

Membre depuis le 07/04/2010

417 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 4,843