Student-Contributed Wiki

Wiki réalisé avec l'aide d'étudiants

Un étudiant hors pair de notre programme d'éducation a rédigé ce wiki. Il n'est pas géré par le personnel d'iFixit.

Acer Aspire V3-571G-9686 Troubleshooting

Having trouble with your Acer Aspire V3-571G-9686? Take a look at this troubleshooting page for help diagnosing your device.

You've plugged in the charger and your laptop will not charge.

Inspect your power adapter for any damages. If there are no visual damages to your

power cord and your laptop still fails to charge, try plugging your power cord into other

functioning laptop to determine if the issue lies within your laptop or the power cord.

It is possible that your outlet power may not be working, try plugging your power cord

into a different wall outlet.

At this point, you have determined that there aren’t many problems with your power cord

or wall outlet, and there must be an issue with your laptop battery.

Sometimes dust, grease, and other particles can build up inside of your computer

preventing components from doing their job. A quick fix would be to unplug any cords

connected into your laptop, power down your laptop, remove the battery, make sure it’s

free from any dust, reinsert it, then power back on your laptop. If this does not work for

you, your last resort would be to replace your old battery with a new one.

If your laptop frequently overheats and/or is currently overheating, it is best advised to

wait until your laptop has completely cooled down before trying to charge it. Increased

temperatures in computers may cause the battery sensor to misinterpret the battery is

fully charged or missing.

Your laptop is charged but the screen is completely blank.

There could be an issue with your screen. Connect the laptop to an external monitor by

plugging in the cable for the VGA external port on the left side of your laptop. Us the F1

and F5 keys to switch your view from your screen to the external monitor. If the problem

persists you likely have an issue with the GPU wiring.

There could be an issue with your battery. Even though you have had it plugged in the

battery could be broken and not receiving a charge. Try turning on the laptop to see if it

makes any noises, to indicate if the laptop is charging or not. If It is making noise that

means there is most likely an issue with the screen or wiring to the screen. If the laptop

doesn't make noise there is most likely an issue with the battery.

The graphics card in your laptop is responsible for displaying images on your screen.

Without a working graphics card your screen will be blank so try replacing it or checking

to see if it has been damaged.

Your laptop is constantly hot and overheating.

There may be dust build up in the fan, the fan provides cooling to the CPU and

graphics card. Try taking the back off of the laptop and cleaning the fan, which is

best done using compressed air.

You can purchase a laptop cooler online which is often cheaper than completely

replacing the fan. This is a small device that blows air into the laptop and

functions as the laptops fan.

Your laptop is not booting into windows and says there was no bootable device found.

There could be an issue with your boot order. Your laptop might be trying to boot a

different drive that does not have Windows on it. The simplest fix for this error is to

make sure your computer’s boot order correctly lists your hard drive as the first option.

Restart your computer and hold down F2 to access your BIOS menu. Go to the boot tab

and change the boot order so that the hard drive is first. Make sure to save your settings

and restart your computer. If the problem persists, you likely have a problem with the

hard drive.

If your laptop says at startup that there is no bootable device then there is an issue with

the hard drive. Try taking out the hard drive, clean out any dust with a vacuum and put it

back in and reboot the laptop. If the problem persists, you likely have an issue with the

hard drive and need it replaced.

The USB on your laptop is not working properly.

USB ports can often get filled with dirt or dust which can damage them and cause them

to not register devices. Avoid blowing into them because you could blow dust into the

computer and cause damage to other parts. Instead, take a vacuum and try to vacuum dust

out of the USB ports. Also check to make sure there is nothing stuck inside the usb ports.

Do not stick anything inside the USB ports, instead check them with a flashlight.

The USB host controller is what connects the device that you are plugging into the USB

port to the computer to transfer data and information. If your laptop is not registering a

device plugged into the USB port and there is nothing stuck inside, it is likely that you

have an issue with you host controllers. Either replace the host controllers or bring your

laptop somewhere to have them repaired.

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 24

Total : 256