Aller au contenu principal
Student-Contributed Wiki

Wiki réalisé avec l'aide d'étudiants

Un étudiant hors pair de notre programme d'éducation a rédigé ce wiki. Il n'est pas géré par le personnel d'iFixit.

The GoPro will not turn on

You are unable to turn on the GoPro or access any functions.

The SD card is faulty

A faulty SD card can cause the GoPro not to turn on. Try removing the SD card and resetting the GoPro by removing and reinserting the battery.

The battery is dead or damaged

A dead battery will cause the GoPro not to turn on. Try charging the GoPro to start. If it still won't turn on, try swapping the battery with a working and fully charged battery. See the battery replacement guide.

The battery housing is faulty

If the GoPro will not turn on with a fully functional battery, the battery housing may be faulty due to a bad connection. In that case, the battery housing may need to be replaced. See the battery housing replacement guide.

The motherboard is faulty

If the GoPro refuses to turn on, the motherboard may be fried. In that case, you may need to replace the motherboard. See the motherboard replacement guide.

The camera freezes up

When trying to use the camera, the GoPro is frozen on a single image, the buttons are unresponsive, and you are unable to perform any actions.

The camera needs to be reset

The camera may just be frozen. Try resetting the GoPro by removing and reinserting the battery. Make sure the battery is charged.

The SD card is wrong

If your GoPro keeps freezing up, you may have the wrong SD card inserted. Check, GoPro's instruction guides to see if that is the case.

The motherboard is faulty

If the GoPro will not turn on after the camera is reset with a fully charged battery, the motherboard may need to be replaced. See the motherboard replacement guide.

The LCD screen is not responding

When trying use the GoPro, the touch screen is unresponsive and you are unable to access the menu or perform any actions.

The LCD screen is faulty

If the LCD screen is not responding but the front screen is still working, the LCD screen may need to be replaced. However, since the LCD screen cannot be removed from the back housing, the back housing may need to be replaced. See the back housing replacement guide.

The connection between the motherboard and screen is severed

GoPros are sometimes used in harsh physical conditions. Hard bumps and shakes while using the GoPro may have caused the connection between the motherboard and screen to be severed. In that case, the only way to know for sure is to open the GoPro and check for connections.

The camera footage has poor quality

Photos and videos produced by the GoPro are blurry and distorted.

The camera housing has condensation or is scratched

Condensation or scratches on the lens cover will cause the recording to come out blurry. You may need to clean or replace the lens cover by twisting and removing it.

The camera lens is faulty

Cracks or scratches on the lens will cause photos and videos to be distorted. Inspect the lens for damage. If there are scratches or cracks, you may need to replace the lens. See the lens assembly replacement guide.

The camera sensor is faulty

If there is no visible damage to the camera housing or lens, the camera sensor may be faulty. In this case, the sensor may need to be replaced. See the lens assembly replacement guide.

11 commentaires

what if I insert the battery incorrectly? Because at the moment I've inserted it upside down :)

The Parkour Kid - Réponse

The door for connecting the charger came off, how do I re-attach the door?

herb - Réponse

theres a vid on youtube

kiabia JKR -

Hello my go pro hero 5 black, have problems with lense. it have poor quality, like from old phones who have like 2 mp cameras. i tried to clean lense, changed settings but still the same. what solution can be? cheers.

Lauris Smiltnieks - Réponse

Hello my gopro hero 5 black front display is not working. Any solution?

Deepak Sawaiyan - Réponse

My go pro will only play through the tv for a few minutes then freezes but it plays fine when not connected to tv

Izzyunwin - Réponse

Hi

I went diving with my gopro hero 5. Now i can turn it on but after a few seconds the screen goes black and it turns of. Any solutions?

Gustav jebsen - Réponse

I can take videos with my Go Pro but it will not upload to my computer

cyndeerubb - Réponse

My GoPro Hero 5 glass of te backside is totally broken. Someone experience how to fix it or repair

Robocop - Réponse

Hi my go pro hero 5 front screen isnt working but the led beside the lens is working though.. Pls help

gianhendrix barawid - Réponse

My gopro hero5 black has a snowy screen image after taking a video for playback but doesnt play at all although it shows a certain amount of runtime. Camera freezes after taking the video. After removing the battery and incerting it again it works but that video cant be viewed and only has a static/sniwy screen.

Chris Grobler - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 37

30 derniers jours : 273

Total : 21,751