Réparez vos affaires

Droit à la réparation

Boutique

MacBook Pro 17" Unibody (Mid 2010-Late 2011) Right Fan

  • MacBook Pro 17" Unibody (Mid 2010-Late 2011) Right Fan
MacBook Pro 17" Unibody (Mid 2010-Late 2011) Right Fan

34,99 $US

34,99 $US

SAUTEZ LA MISE À NIVEAU

Économisez en réparant avec un kit tout-en-un.

Fix Kits pour iPhone

SAUTEZ LA MISE À NIVEAU

Économisez en réparant avec un kit tout-en-un.

Fix Kits pour iPhone

Détails du produit

Description

Description

An aging right fan may become noisy and inefficient or simply fail and stop spinning, leaving your MacBook Pro 17" Unibody (Mid 2010-Late 2011) to overheat and eventually damaging your processors. Replace a defective fan to fix overheating problems or to keep your laptop running quietly.

Compatibilité

Compatibilité

  • MacBook Pro 17" Unibody A1297 Mid 2010 to Late 2011

Spécifications

Spécifications

Part #:
922-9294

Compatibilité

MacBook Pro 17" Unibody
A1297 (EMC 2352) 2.53 GHz (Mid 2010)
A1297 (EMC 2352) 2.66 GHz (Mid 2010)
A1297 (EMC 2352) 2.8 GHz (Mid 2010)
A1297 (EMC 2352-1) 2.2 GHz (Early 2011)
A1297 (EMC 2352-1) 2.3 GHz (Early 2011)
A1297 (EMC 2564) 2.4 GHz (Late 2011)
A1297 (EMC 2564) 2.5 GHz (Late 2011)

Histoires de réparations

Avatar de l'utilisateur

Mon problème

Fan stopped working

Ma solution

Went perfect. Though funny enough the fan started working again the day before my replacement arrived. I replaced it anyway.

Mon conseil

make sure you keep track of your screws

Avatar de l'utilisateur

Mon problème

The MacBook Pro 17" would boot to a gray screen or if left alone for a while it would boot, but eventually crash. The area around the GPU memory was warm and the bolts connected to the GPU heatsink were very hot to the touch. Swapped the left fan with the right to see if the fans were working. The f . . .

Avatar de l'utilisateur

Mon problème

One day my MacBook Pro started rattling very loudly whenever the fans came on. It was very annoying and got in the way of my work.

Ma solution

It took me about a half hour to complete the repair, except that I had to run out to get a new screwdriver in the middle of the repair. The repair described in the manu . . .