Introduction

To access the internal components of the guitar and diagnose problems, you must remove the rear case. This guide will demonstrate how to remove the rear case properly.

Pièces

Aucune pièce nécessaire.

Remove the strap by pulling it off of the mounts located on the body and neck. Remove the strap by pulling it off of the mounts located on the body and neck.
  • Remove the strap by pulling it off of the mounts located on the body and neck.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a  screwdriver. Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver. Pull off the rear case.
  • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

  • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

  • Pull off the rear case.

Ajouter un commentaire

Remove the five 12mm Phillips #1 screws along the neck with a  screwdriver. Pull off the top shell of the neck to expose the internal features. Pull off the top shell of the neck to expose the internal features.
  • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

  • Pull off the top shell of the neck to expose the internal features.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Riley

Membre depuis le 18/04/2018

565 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team S17-G1, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S17-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G1

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 32