Rep: 1
1
I fried my cpu on my MacPro 2006. Has anyone found a good step by step manual to do this? Perhaps a youtube video? Also, I'm especially concerned about the cpu heat sink bond and if there are any pitfalls I need to be aware of!
Cette question est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
You would need to replace the logic board. Read through this assessment before going ahead: http://www.everymac.com/systems/apple/ma...
Cette réponse est-elle utile ?
Rep: 345
5
5
1
The macbook pro you have has soldered on CPU. You cannot change it without the appropriate equipment. Also, a Xeon chip will probably never work with your computer's chipset in the first place, and Xeons are a socketed CPU, not soldered. Im pretty sure your stuck with your CPU.
Cette réponse est-elle utile ?
It is a MacPro, 1,1, early 2006.
Oh sorry man, I totally thought I saw a macbook in the title, sorry for your confusion. You should take a look at Mayer's post XD
Could you expand this topic a little further? Which series have the CPU soldered and which don't? Were the first Quad-Core CPUs (MacPro2,1) already soldered?
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 523
