Réparez vos affaires Communauté Boutique

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

1502 questions Voir tout
Question close

Options

Why I can't turn on my iPhone after 6r8 repair?

Hi,

sorry for my language, I can't write in English fluently.

I have an iPhone 3GS 32 GB. Before I give him to my friend, It turns on, and work, but he don't have backlight. So I decided to repair It. I bought 6r8 coil and give It to my friend to solder It. After that, my phone won't turn on. I plug in It to my PC, trying DFU mode, and It's not working. Have anybody any solutions, how to repair it?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
2 commentaires

try putting on wall charger for 1 hour and see if it boots, sometimes the battery connector isn't screwed in enough, dock connector (no4) is loose. Take the board out for 1 hour and then try again to reassemble and power up. oldturkey03 is spot on with his advice though.. :-)

par

I tried your advices, and it's not working..

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Luke, I'd start of by inspecting the logic board. The coil is a bit of a pain to solder and unless one had lots of practice and the right tools, it could be possible that the soldering has caused a failure in any of the circuits. Check for bad solder joints, bridged solder etc.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 7

Total : 266