Options

No service after screen replacement

There is a small component right above the battery connection point. From reading other forms it appears to be an rf testing point. This portion came off when I was prying the batter up. Now I do not have service. I have tried everything the other forms say. leaving it alone for ten minutes, calling out, calling the phone, etc. Is there anyway to reconnect this component? Is it necessary for service or do I have another problem?

Thanks,

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice -1

1 commentaire

Could you make a detailed picture of the motherboard?

Maybe you could bridge the component with a bit of soldering. Or you could send it to a motherboard repairshop.

8 juil. 2013 par RenaatS

Ajouter un commentaire

Publié: 8 juil. 2013

Options

Logan, that is not a testing point, but a connector. In this case it is a Hirose MS-180 connector. It is available at places like this. Yes you will have to have it and it needs to be soldered back onto the board. Hope this helps, good luck.

Cette réponse est-elle utile ?

Oui Non

Indice 0

2 commentaires:

Thank you. I've ordered the parts but I underestimated how small of soldering wire I'd need, so I am in search of small diameter solder. Thank you for your help!

13 juil. 2013 par Logan

Logan, thank you for accepting my answer. If you have not soldered a lot of small components, I would practice on an old board first :-) Good Luck

13 juil. 2013 par oldturkey03

Ajouter un commentaire

iPhone 4S

No service after screen replacement

1 Réponse

Ajouter une réponse