RÉSOLU : problem re-seating the Graphics card on the logic board - MacBook Pro 15" Core 2 Duo Models A1226 and A1260

problem re-seating the Graphics card on the logic board

this is my second question on the same problem. i was able to successfully recover the use of the display after removing the logic board and heating and re-seating the graphics card. However,i have done this twice now and each time the 'fix' only lasts for a few hours and then the screen suddenly goes black. question; how hot should i be getting the graphics card in order to permanently re-seat it so it will stay fixed.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice -1

Publié: 7 déc. 2009

Options

That's the problem with home repairs of ball joint chips. Sometimes it works-sometimes not and there is always a risk of destroying the logic board. There are a number of companies that have the equipment to do a proper repair for around $50. If it were my board I would google the problem and send it to be repaired. Ralph

Cette réponse est-elle utile ?

Oui Non

Indice 0

1 commentaire:

The following URL list a number of companies doing this type of repair. Ralph

http://www.google.com/#hl=en&source=hp&q...

7 déc. 2009 par rj713

Ajouter un commentaire

MacBook Pro 15" Core 2 Duo Modèles A1226 and A1260

problem re-seating the Graphics card on the logic board

1 Réponse

Ajouter une réponse