Aller au contenu principal

Deuxième génération de l'iPhone. Modèle A1241 / capacité de 8 ou 16 Go / coque arrière noire ou blanche. La réparation est plus simple que pour l'iPhone de première génération et nécessite des tournevis, des outils pour faire levier et une ventouse.

1169 questions Voir tout
Question close

Identify part that fell out when repairing

After following the step by step instructions on replacing broken glass a small silver piece and circular part fell out. It has the letters h-f on it. Can you tell me what this is and where they belong?

It fell out right after step 6. when I disconnected ribbons 1,2,3. and removed the glass from the mother board.

Block Image

A larger view of the part.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
1 commentaire

Post an image of your part with your question. It will make it a lot easier to identify.

par

Ajouter un commentaire

2 Réponses

Réponse la plus utile

Hello! It is the "MIC" of iPhone 3G. Show u as below pictures.

It belongs to complete dock assembly replacement. So I think you need to replace this spare part.

Here is the replacement part , http://bit.ly/1bLJiwc . You can know more at this website.

Hope will help you.

Block Image

Block Image

Block Image

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

can you make the picture bigger?

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

also you didnt mention at whatpoint it fell out

par

I cant find a place for it either, could it have come from somewhere on the broken glass screen? I would try finishing the repair as normal and seeing if it works then troubleshoot it from there. If it turns on, check all the settings and buttons and make sure they are working.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 9

Total : 99