Aller au contenu principal

This page contains replacement guides and a troubleshooting section for the Craftsman Scroller Saw Double Insulated 5/8" Stroke-Variable Speed (Model 315.10721). This handsaw was manufactured in 1979 by Sears, Roebuck and Co.

7 questions Voir tout

Why is the saw blade bouncing when I am making a cut?

When making a cut the saw blade seems to bounce up and down. It will not make a clean cut through the material. I have tried using different speeds but it is still bouncing

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Wrong blade for material - too big, too large, too dull.

What material are you cutting. How thick is the material, what type of blade are you using, how many teeth per inch. The answer to all those questions contains the solution to your problem.

If this answer is acceptable please remember to return and mark it.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Riley Hilliker sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 86