Réparez vos affaires Communauté Boutique

6ème génération de l'Apple iPhone, annoncé le 12 septembre 2012. La réparation de cet appareil est similaire aux précédents modèles et nécessite des tournevis et des outils pour ouvrir et faire levier. Disponible en GSM ou CDMA / 16, 32 ou 64Go / Noir ou Blanc.

2522 questions Voir tout

Options

How to replace/desolder iPhone 5 SIM card reader?

Hello,

My iPhone 5 always seems to say "No SIM" even when inserting several SIM cards and cleaning the tray and internals. I strongly believe this is a SIM card reader fault, hence please may I ask how I would do about de-soldering and soldering on a new SIM card reader on the iPhone 5?

I looked at several resources online and they have given me a general idea since there aren't many guides online, hence could I please ask you guys for more specifics on how-to? I apologise for the bother.

Thank you ever so sincerely! :)

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 8
Ajouter un commentaire

6 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Alright, I guess I'm gonna throw my hat into this crisis of misinformation. So, OP, if you don't have a smd work station and experience in soldering, this is not for you. What you should do is look into a GOOD board repair shop that can do this, and if that's worth getting a used iPhone 5. The phone that's next on the list to become extinct. Sounds like a $75 purchase on Craigslist. This particular repair would be difficult, especially because of the plastic components. I do have a technique for this, but still, not easy. Not for a beginner for sure. The only person who made an ounce of sense was that David F guy. The rest are not things that remotely make sense

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire
Réponse la plus utile

Options

It is not an easy task the problem are the 2 solderpads hidden under the sim contact made in a plastic frame

Cette réponse est-elle utile ?

Oui Non
Indice 3
Ajouter un commentaire

Options

If you have to ask i don't think you will be able to do it, it's not easy to resolder such a tiny component. My bets advice to you is get an old circuit board, I use a RROD Xbox 360 and practice soldering onto it.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

https://www.youtube.com/watch?v=7o6f_zq2...

This video showed it pretty good for me atleast! Hope you all the best!

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

That video didn't show how to do anything. However, I just started looking into this but I imagine you wouldn't actually "solder", you'd use a heat gun. Any time there's multiple solder points, it's usually best to use a heat gun to soften the solder.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

I suggest to bring the unit to iPhone service center and let them fix it for you.they were more competent than us since it was their kind of job

Cette réponse est-elle utile ?

Oui Non
Indice 0

2 commentaires:

How much would that cost?

par

They don't microsolder at Apple. They sell you a new phone

par

Ajouter un commentaire

Ajouter une réponse

Arif Ullah sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 5

Total : 24,865