Réparez vos affaires Communauté Boutique

La deuxième génération de l'iPad avec les modèles Wi-Fi, GSM et CDMA. Certains modèles ont été rafraîchis avant l'iPad 3. La réparation est difficile, nécessitant de chauffer les parties collées, ainsi que de la précision et de la concentration afin de judicieusement détacher les différents composants.

730 questions Voir tout

Options

Digitizer/Screen keeps popping up after replaced? any help?

I have replaced the screen/digitizer on probably 5 or 6 ipad 2's and on every single one i have replace the most difficult thing is to keep the screen/digitizer glued down, it keeps popping up in one problem area on every IPAD. I have used the adhesive that the new screens come with, i have also tried buying different adhesive and still get the same issue. I make sure the frame is cleaned of any and all old adhesive and i make sure that the frame isn't obstructing the new screen from laying flush. So far i cannot find any answer and i dont understand why im having such a hard time with this issue. Every video i watch never puts much information into this problem and always act as if you just place it down in the right place and it always stays. Any help would be very greatly appreciated. I am finding myself straying away from IPAD repairs because of this issue and if anyone has any answers it would be greatly appreciated. thx

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

4 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Hi david,

This has been answered before. See here and let us know if it helped.

I've found that properly seating the digitizer and digitizer cable will allow the panel to sit flush without any kind of pressure.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire
Réponse la plus utile

Options

Bet if pops up on bottom left..

The screen cable needs to be folded between lcd and not against frame

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

When putting the screen back on an iPad, I've found that the adhesive works better if it's heated up after you place the screen on. The best way to do this is to use the iOpener to provide heat while gently applying pressure to the area of the screen that you are heating

Image iOpener

Produit

iOpener

$19.99

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

I have this problem, too, except it is on my iPhone 5S. I have replaced the screen a couple of times, but the affects haven't been clear until the screen started popping up on the side where the volume buttons are. It also has been shutting down continuously every time I do so little as tap the screen. The phone is old, but I found out that it can be fixed; the battery is just swelling up from overcharging and all I have to do is replace it. I'm not sure if it is the same for iPads but hopefully it may work as well!

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

David sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 20

Total : 9,338