Aller au contenu principal

6ème génération de l'Apple iPhone, annoncé le 12 septembre 2012. La réparation de cet appareil est similaire aux précédents modèles et nécessite des tournevis et des outils pour ouvrir et faire levier. Disponible en GSM ou CDMA / 16, 32 ou 64Go / Noir ou Blanc.

2522 questions Voir tout
Question close

iPhone 5 keeps rebooting after water damage

Hope you can help me out, my iPhone fell into the water. After this my iPhone will only boot up when the charger is plugged in. Then it boots up every 3 seconds. So I openend up my phone and I saw the following was missing:

Block Image

Is this the problem?

Or should I replace my U2 ic?

Hope anyone can help me out!

Thanks in advance!

Thomas.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Thomas, yes that is a part that could be the cause for it. It is reference designator FL10 which is a 120OHM 210MA fixed inductor in a 01005 package. Go with that first. It's a lot easier to replace that one than U2. Make sure that you clean your board properly with isopropyl alcohol etc. while you are replacing the inductor.

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Really, you are so great! Thanks! One last question, think you hear this one a lot, where can i find and order the 120 OHM 210MA fixed inductor?

Again thank you very much!

par

Of all places, you can get it from Amazon Of course, my choice would be this one.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 459