Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

La gamme actuelle d'iPod Nano comprend 7 générations différentes.

Questions au sujet de 1198 Voir tout

Battery Replacement Alternate Method with No Soldering

I followed directions on replacing the ipod nano battery,but I must not be as good at soldering as I thought I was. I saw another method which suggests leaving the original wires soldered to the mother board and then splicing the new battery wires to the old battery wires which involves no soldering. Might want to suggest this as an alternative on your sight. Not giving up am going to try resoldering.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Score 1
Ajouter un commentaire

Kits pour Nintendo Switch

Une solution rapide pour reprendre le jeu

Acheter un kit pour Switch

Kits pour Nintendo Switch

Une solution rapide pour reprendre le jeu

Acheter un kit pour Switch

4 solutions

Réponse la plus utile

Splicing the wires would work, it will also give you a little more headroom. You should be able to use electrical tape to seal the cable joints. This is only a good idea when the wires aren't moving, so the joints stay intact. The inside of an iPod would be one of the very few places whre it would be a good method.

Cette réponse a-t-elle été utile ?

Score 1
Ajouter un commentaire

The advantage of using the splice method is you don't have to remove anything, removing the ribbons from the screen and the control wheel took alot of patience to disconnect and reconnect. I was able to do this successfully but I failed at soldering, the ipod still works as long as I use it with a dock that is plugged into the wall, but will not work when I plug into my computer. When connected to my computer I get the low battery warning. I purchased a Duracell external battery with FM tuner for 79.99 and will post if this solution works.

Cette réponse a-t-elle été utile ?

Score 0
Ajouter un commentaire

is there a tutorial for this method here or elsewhere? i am a bit afraid to use a soldering iron honestly, all i have done with replacement parts so far is my macbook fan. [which i used the tutorial on this site for, thanks!]

Cette réponse a-t-elle été utile ?

Score 0

Commentaires:

cass, you should really ask your own question if you expect some help. NOBODY sees that you are asking if it is tagged on as an answer. It is not hard to do that. Anyhow, you could start here http://www.instructables.com/id/Solderin... here http://www.technick.net/public/code/cp_d... and http://www.infidigm.net/articles/solder/...

par

okay thanks for the tips!

par

Ajouter un commentaire

I suggest you get a 'helping hand' if your going to do some soldering - one similar to this (http://www.mds975.co.uk/Images/amateur_r...)

You can get them on eBay for a few pounds and will save you from heartache when you try and hold 3 things while soldering a minuscule solder point :)

I would practice a few solders beforehand - get a decent iron, take your time!

Cette réponse a-t-elle été utile ?

Score 0
Ajouter un commentaire

Ajouter une réponse

kmhiggi sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 5

Total : 2,079