Aller au contenu principal

Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

212 questions Voir tout

No Power after CPU upgrade

Hi!

I've updated old iMac cpu from Core Duo to Core 2 Duo.

Now iMac won't power on (power light waking for 5 seconds after it power goes off)

iMac doesn't power even if I tried with original cpu.

Model is iMac Early 2006 20 inch A1174.

Should logic board power on without case (like on desktop)?

Power supply looks OK (I've tried also ATX psu but same problem)

Battery changing tried also.

Some problem on logic board?

HELP!

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

1 Réponse

Réponse la plus utile

Examine the capacitors (cans) for corrosion, swelling and or leakage. What are the LEDs in the center showing on boot up? Use the reset and restart gray buttons on the logic board to the left of the LEDs to attempt restart.

Cette réponse est-elle utile ?

Indice 1

10 commentaires:

This is early 2006 model (no diagnostic leds) :( And capacitors is ok. Before CPU upgrade iMac worked well.

I've tried many cpus but no success. Only power light goes on and hdd starts (no startup chime) 5 seconds after iMac goes off.

par

Please give the last four figures of your serial number, (located on the bottom of the stand).

par

GU2P

EMC No.: 2105

iMac 20"/2.0GHZ/512MB/250GB/SD/AP/BT

par

Apple iMac "Core Duo" 2.0 20-Inch Specs

Identifiers: Early 2006 - MA200LL - iMac4,1 - A1174 - 2105

par

Here's the guide for the CPU upgrade but that does not appear to be your issue. Try disconnecting the hard drive cable and see if it will boot from the original system installation CD. http://www.maclife.com/article/create_up...

par

Voir 5 commentaires en plus

Ajouter un commentaire

Ajouter une réponse

MacProblemer sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 3

Total : 239