Rep: 13
1
Just replaced my wife's iPhone 6 screen with one from iFixit and it has vertical gray lines. I tried reseating the cables. No dice. Tried unplugging battery for 30 seconds. Checked connectors for bent pins. Don't see any.
Cette question est-elle utile ?
Rep: 675
3
This is normally because of a pinch in the ribbon cable that has damaged data lines or the LCD cable was flexed at the LCD and broke connections.
I have also seen this in rare occasions if the digitizer cable is not properly seated.
Cette réponse est-elle utile ?
thanks for your reply.. so does that mean this digitizer is hosed and i need a new one?
I just had that issue when I was replacing my screen and found the problem to be one of the connectors from the digitizer not being properly seated.
Rep: 421
4
1
2
Either the above answer by chriswku03, or it's because the units enclosure is bent out of shape.
It is a pretty thin piece of aluminum after all, so it doesn't take a whole lot before its bent, especially if dropped.
Cette réponse est-elle utile ?
Rep: 13
1
I plugged in the original cracked one and it worked fine. iFixit sent me a new unit that works perfectly. Great customer service!
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 1,339
