Options

Broken LCD connector - is it toast?

I was replacing an iPad 4 and chipped the LCD FPC connector. I plugged in an LCD right away and it started without any problem - no screen issues whatsoever. So I took it out of the connector to assemble the digitizer and once I connected the LCD again I've got nothing. Not a flicker. My guess is the upper pins are impeding the bottom connection, but I don't want tot risk irreparably damaging the device. Does anybody have any suggestions or a similar experience or do I have to send this thing away to get micro-soldered? Is this a soldering job I could do myself with the right part (not an overly experienced solderer)?

If I should send it out to be replaced, can anyone recommend someone who can do the repair quickly if I pay for express shipping? I've tried to contact iPad Rehab but I'm not getting a response and I need to get this repaired for a customer ASAP. Thanks.

- Brandon

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

Ajouter un commentaire

Publié: 15 juil. 2015

Options

My advice is to send it to an experienced micro-soldering technician.

1st, if you're not an experienced solderer, it is good to get training, but not on a working device that you risk damaging permanently in case you mess up the pads underneath the connector for example.

Thus, if I were you, and I want to tackle this repair, I'd master it on scrap boards first.

2nd, you need excellent tools for this kind of precision job. A very experienced solderer can get away with average tools. Not a beginner. If this is gonna be a once-in-a-month kind of repair, it makes more economical sense to send it out than to invest money for expensive tools and time training.

Cette réponse est-elle utile ?

Oui Non

Indice 1

Ajouter un commentaire

iPad 4 Wi-Fi

Broken LCD connector - is it toast?

1 Réponse

Ajouter une réponse