Réparez vos affaires Communauté Boutique

Released in November 2012, the GoPro HERO3 is a Wi-Fi capable, 4K resolution digital camcorder.

104 questions Voir tout

Options

My GoPro got wet

Hi. I was surfing and after a wipeout my GoPro case got broken and consequently my GoPro Hero 3 got wet (salt water).

I tried to let it dry but after this incident, the camera doesn't turn on anymore and now only blink a red light on the back of the camera.

Nothing else happens.

When I let it charging for around 30 minutes, the GoPro display shows "GoPro" but nothing else happens.

Do you guys think that could it be a solution for that? I really don't know if it is, but.. well.. let's try to ask ;)

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
1 commentaire

I'm experiencing the same issue. But, I did NOT wipe out and I have been incredibly careful with the housing and camera. The is the second GoPro to have issues. I think it's time to give up!!

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Hi,

So the bad news is salt water is electronics' worst enemy. With that being said, the device still shows sign of life which is good. What you can do is follow the ifixit teardown guide to take out the logic board. After you take it out put it in something that has greater than 70% alcohol and scrub it with a toothbrush. dry it with a hair dryer or just leaving it out to dry for a few hours and try to reassemble it. If the water damage was minor, it should work.

GoPro Hero3 Teardown

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

Thank you so much I don’t know what I would have done without this

par

Ajouter un commentaire

Ajouter une réponse

ra7osurf sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 14

Total : 1,287