Rep: 67
4
2
I watched inside card reader.
then I saw bent something.(just one)
Is that not right?
Everything staight up to bottom
but just one is left to right.
Do I have to replace or remove it?
Thank you!
I'm waiting for answer :-)
Cette question est-elle utile ?
Rep: 157
3
if you know how to solder. you can replace it with this..
Cette réponse est-elle utile ?
Thank you. It will help for me.
:-)
ok, i have to accept that you changed your mind and accepted his answer.....
Rep: 35,1k
140
71
53
ok, i was right.
it was not necessary to open a new question for that. but you can close the othere one by accepting the answer there.
the card readers are very weak - surely you could try to bend the wire back - but it will most likely break.
replacing the card reader is the only real fix for that
Cette réponse est-elle utile ?
Yes, you're right! :-)
I'm gonna replacing the card reader.
Thank you for answer.
I have a scan disk card as it was inserted into a card reader it was bent right in the middle. Can the data be recovered from it...it has several pictures and video on it?
Cette réponse est-elle utile ?
Stephanie, you will get much better help if you ask your own question and not tag it on as an answer to an old question. When you ask your question you should also give more info. Like the type of the card and where is it bend etc. Good luck
I watched inside card reader.EverytDo I have to replace or remove it?hing staight up to bottomThank you I'm waiting for answer
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 7
30 derniers jours : 10
Total : 5,573
