front bumper cover replacement
How to replace the front bumper cover
Cette question est-elle utile ?
Indice
0
246768
1 Réponse
Solution retenue
Rep: 782,8k
1,1k
893
2,3k
ROMULO SILVERIO, this from the service manual:
2. REMOVE BUMPER COVER
(a) Remove the 2 bolts and 3 clips.
Torque: 5.5 N·m (55 kgf·cm, 49 in.·lbf)
(b) Remove the bolt holding the bumper end to the fender.
(c) Pull the bumper cover forward to remove the bumper cover from the clip under the turn signal light area.
(d) Pull the bumper cover forward to remove it.
HINT:
At the time of installation, please refer to the refer to the following item.
Align the holes of the bumper cover with the 2 bumper stays of the reinforcement.
Cette réponse est-elle utile ?
Indice
2
