Réparez vos affaires Communauté Boutique

Sorti le 19 septembre 2014, cet iPhone avec un écran de 4,7 pouces est une version plus petite de l'iPhone 6 Plus. Identifiables par les numéros de modèle A1549, A1586, et A1589.

4994 questions Voir tout
Question close

Options

Black screen no picture but phone works

I have an iPhone 6 the first repair I did the top part of the screen was coming off and I put a little bit of glue but that just messed up the screen so I took it off and I put a new one now the new one doesn't show anything either but the phone is working has I can hear it but I can't see anything does anyone know how to fix this sometimes the screen turns black can't see nothing but it looks like it's trying to come on

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
1 commentaire

the new screen does work has well has I tested it on another phone

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Look at the screws in the little plate that goes on top of the lcd connectors. The bottom two and the middle one should all be the same length, the top left being a little longer, and the top right longer still. If there are longer screws in shorter holes (a longer screw in one of those bottom 3) you have possibly damaged your board. Google long screw damage, its most known on the iphone 5s rather than the 6 but is still an issue, it just presents like you're describing as opposed to BSOD

The repair is to rebuild traces along where the board is crushed, a repair for the highest level of patience and skill, far beyond my skill. There is a sendoff/mail in service that can be found online based out of new york that can possibly repair it, otherwise you're kind of stuck for a trip to the apple store and a $323 out of warranty replacement IF this is the damage on the phone.

Cette réponse est-elle utile ?

Oui Non
Indice 0

3 commentaires:

I did check but there's nothing working with the connectors or anything could it have been the crazy glue I used I checked the lcd connectors on the board and they all seem perfectly fine

par

I did check but there's nothing wrong with the connectors or anything could it have been the crazy glue I used I checked the lcd connectors on the board they all seem perfect I put crazy glue on the lcd screen no where near the board but I feel like that had some effect to it

par

unless you made a giant crazy glue mess on the board instead of just keeping the glue on the display, I'd think that isn't what caused it.

Do you have a microscope? Look down in those 3 nuts specifically the one on the left side and see if you see any copper.

It sounds like you've lost the backlight for whatever reason, long screw damage would do that, theres other board components that can be damaged but typically not by just a display replacement.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 9,902