Click Wheel Ribbon Cable Lock?

Question

iPod Classic

Modèle A1238 / avec disque dure de 80, 120 ou 160 Go / façade en métal noir ou argenté

20 questions Voir tout

Question close

Hoss @hoss85792

Rep: 21

1

Publié: 5 sept. 2015

Options

Click Wheel Ribbon Cable Lock?

When I replaced by Logic Board in my iPod Classic 7th Gen, the plastic tab holding the orange click wheel ribbon in place broke off. The ribbon cable is seated in the connector and appears to be holding since the cable also sticks to the logic board. However, the click wheel is not working upon complete reassembly.

Does the plastic holding tab need to be locked in place to make the connection work?

Thanks..

-Lorne

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

Ajouter un commentaire

2 Réponses

Solution retenue

Johnny Martini @johnnymartini

Rep: 587

4

1

Publié: 5 sept. 2015

Options

The ribbon may sticks on the board, but the holding tab needs to be closed to make propper contact.

The tab is pressing the cable on the contacts in the connector.

Cette réponse est-elle utile ?

Oui Non

Indice 1

4 commentaires:

So does that means I need a new logic board?

5 sept. 2015 par Hoss

No because you said you changed it

5 sept. 2015 par Elias S

i guess the the tab broke off on the new logicboard. Maybe you can find a shop who will change the connector. Or you could try to stick a thin layer of tape on the end of the ribboncable(not on the side with the contacts) and try to fit it in. But im not 100% if this will work.

Otherwise you have to buy a new logicboard. Im sorry.

5 sept. 2015 par Johnny Martini

Yeah, I broke the tab on the new logic board. Bummer that I have to replace it again... Thanks for the info!

5 sept. 2015 par Hoss

Ajouter un commentaire

i guess the the tab broke off on the new logicboard. Maybe you can find a shop who will change the connector. Or you could try to stick a thin layer of tape on the end of the ribboncable(not on the side with the contacts) and try to fit it in. But im not 100% if this will work.

Otherwise you have to buy a new logicboard. Im sorry. — Johnny Martini
Yeah, I broke the tab on the new logic board. Bummer that I have to replace it again... Thanks for the info! — Hoss

Alexander Hollander @alexanderh83208 Rep: 67 3 · Answer 1 · 2016-01-10T19:24:19-07:00

Alexander Hollander @alexanderh83208

Rep: 67

3

Publié: 10 janv. 2016

Options

Hi Hoss,

I had snapped off the little plastic tab that holds in the keyboard ribbon cable on a laptop, and found an easy way to fix it.

The same problem can occur on may different devices, such as CD players, laptop keyboard connectors, camera ribbon cable connectors, etc.

If you break off this little tab, the ribbon cable is not held in at all, and just falls out of the connector.

On the off chance that you have the same type of problem, check out my YouTube video I had posted last year. Not sure what is wrong with your connector. If it is the same problem, you can easily fix it in a few minutes.

Easy Ribbon Cable Connector Fix, Repair.

https://www.youtube.com/watch?v=bhaeKdUl...

Cette réponse est-elle utile ?

Oui Non

Indice -1

3 commentaires:

looks like your video is no longer available.

10 janv. 2016 par oldturkey03

I checked it a few minutes ago, it is there.

https://www.youtube.com/watch?v=bhaeKdUl...

10 janv. 2016 par Alexander Hollander

The link in the original post seems to have been cut off when it was posted.