Rep: 73
3
1
I have changed a few ipad mini 2 screens, but this one i have tried x2 digitizers and although home button works fine, the touch screen doesnt work at all. I was working before with the cracked screen. Any ideas?
Cette question est-elle utile ?
Rep: 73
3
1
Hi Thanks for that. It looks like i have x5 copper pins missing (see image) do you think this is the cause and whats my next steps?
Thanks
ian
Cette réponse est-elle utile ?
Totally repairable. Send out for digitizer fpc connector replacement. We do this every day. If you can't find someone local, we offer a mail in board repair service for people all over the world. Far less expensive than replacing the device. Look me up at iPad Rehab.
Rep: 5,3k
9
15
4
Visually inspect where the digitizer plugs into the logic board. look for bent or missing gold pins. You may require magnification to inspect the area.
Cette réponse est-elle utile ?
Rep: 5,3k
9
15
4
Are you able to connect the old cracked screen to see if it still works? It's possible that the connector on the logic board is damaged , they are extremely fragile.
Cette réponse est-elle utile ?
Rep: 73
3
1
I could not as screen was totally smashed when removed. is there a way to check damage if its the connection on the logic board?
Cette réponse est-elle utile ?
Rep: 5,3k
9
15
4
Yup that is definitely it. You will need to find someone capable of board level repairs. The connector will need to be replaced. It is a common issue , those connectors seem to be especially fragile on the mini 2.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 2
30 derniers jours : 3
Total : 315
1 commentaire
It was so bad that was not salvaged im afraid.
par Ian Knight