Rep: 11
1
I was soldering off the battery terminals and the last pad came off. How can I fix this? I no longer have the old battery with the pad on it.
Thank you in advance.
Cette question est-elle utile ?
Rep: 784,3k
1,1k
894
2,3k
Ronni Denny you most likely cannot. the solder pads are actually solder to the traces. If you would use a microscope and a very fine needle and carefully scrape the top layer material where the original pad was, you'd find a connector right about in the middle of the pad. Anyhow, your only option will be to try to solder a wire from the battery connector to a trace from that pad. Clean your board and give us another picture which is straigh on and a bit closer.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 3
30 derniers jours : 4
Total : 139
3 commentaires
Ronni Denny post some images of the damage with your question so we can see what you see. Use this guide Ajout d'images à une question existante for that
par oldturkey03
I added the photo.
par Ronni Denny
I also have another iPod touch 4th gen logic board that has all of the pads on it, could I possibly use one of those pads on this iPod?
par Ronni Denny