Aller au contenu principal

Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

343 questions Voir tout

iMac display not working

I have an iMac 2010, 21,5" which has hardrive problem and replaced it. While connecting its LCD with display connector cable, the cable got damaged at one end. I got new display-port connector cable, but still display is not working.

When I connected with external monitor, its working fine.

I asked at a local repair store they told me that it was either the LCD panel, or the SATA/Board (Logic board?) which would even be more expensive.

I thought its a LCD problem, got LCD from ebay but still the display is not working.

I did a SMC/PVRAM Reset, but this did not solve the problem.

I used flashlight and cant see anything on the internal screen.

My question is whether it's possible to determine if it is the logic board, cable connection, the Backlight controller or the LCD-Panel.

Thanks for your answers,

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
1 commentaire

Fans running at full speed too?

par

Ajouter un commentaire

2 Réponses

Réponse la plus utile

You should try the diag leds first to see if its the lcd. They are just above the mic connector on the logic board. The #4 led is green if the lcd is making connection with the motherboard. If the #4 led is green, maybe the motherboard defective because you changed the lcd and the lcd cable allready.

Cette réponse est-elle utile ?

Indice 1

2 commentaires:

I did check the LED, #1 LED green, #2 LED green, #3 LED green but #4 LED is off.

par

If you allready changed the lcd and the lcd cable i am thinking about the motherboard connector. Try to change the lcd temp cable the thin one.

par

Ajouter un commentaire

I had the same problem. Only external video, LED4 of. In my case, inductor L9000 of the logic board was gone. If you want, have a look at my post

After HD changed, fuse (wall) tripped, no internal video, but external

Regards.

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

SAme problem here.. already bought the fuse.. but can't locate the L9000 circuit on my MB..please Help!

par

Hi Christiano,

I just updated my answer to my own post. Hope, this helps.

Regards from Hamburg

After HD changed, fuse (wall) tripped, no internal video, but external

par

Ajouter un commentaire

Ajouter une réponse

Shailender Rachamalla sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 912