Aller au contenu principal

La Magic Mouse est une souris multi-touch fabriquée et vendue par Apple. Elle a été annoncée et vendue pour la première fois le 20 Octobre 2009.

52 questions Voir tout

How do I reattach the capacitor board to get touch capability?

My magic mouse came apart after dropping it. I put it back together and I am able to point and click with it, but I lost the "magic" touch capability for scrolling, etc. I think it's because the orange tab that is part of the capacitive touch sensors isn't connected to the circuit board in the mouse. Can someone tell me how to re-attach it properly? It would be MUCH appreciated... :)

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 2
Ajouter un commentaire

2 Réponses

Réponse la plus utile

This is probably the most difficult procedures for repairing the Magic Mouse. The reason isn't so much because it is difficult technically. The Ribbon cable just slides in to the attaching point. The problem is it is in a odd position with little room to hold the cable. You will need a small thin set of needle nose pliers or hemostats. Attach the hemostats to the ribbon cable near the middle of the cable (enough to hold the cable stiff. Align the cable with the slot and try to push the cable in. Once it is in be careful not to pull it out again. Put the mouse back together and it should work fine. Follow the instructions in ifixit Magic mouse tear down procedure.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

...or see this Video on YouTube

You can achieve the same result also without breaking nothing. You have only to raisen the black plastic parts a little bit and extract the ribbon cable:

Block Image

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Sheilah sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 6

30 derniers jours : 14

Total : 3,391