Réparez vos affaires Communauté Boutique

Modèle A1419 / Fin 2012 / Processeur 2.9 & 3.2 GHz Core i5 ou 3.4 GHz Core i7, ID iMac13,2

330 questions Voir tout

Options

iMac does not start , does not turn diagnostic LEDs

My problem is due to a 27-inch iMac Late 2012 Quad Core Processor 2.9, was replacing the HDD of this machine, the Mac I then lit the job done. Shut down your Mac and try to light again but this no longer wanted to turn more.

I have tried to make it on again, and change the power supply, replace the battery of Mother Board, Remove all electronic parts and place in anti-static bags but the iMac does not react. When connecting your iMac to the electric current, is not none of the LEDs lights of diagnotico.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 2
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Check the wall plug. You should at least get #1 diagnostic light on if it is getting power.

Cette réponse est-elle utile ?

Oui Non
Indice 1

3 commentaires:

Saw that my power cord esta working well, the perobarlo with another iMac.

Included with another probe power supply UN in good esatdo iMac .

Still not turn me any diagnostic LEDs . UN to Perform battery replacement Madre Y NO results have Baord .

Case I think it's a little more advanced by what is presented .

par

I suspect that you got a bad replacement power supply. Use a multimeter to test if you are getting power to it. Thanks for the email and posting the question.

par

Believe me it is a source taken from another iMac , which works in perfect condition. I think the problem esta linked to the logic board , appreciate any help from you or other members lls .

And thank you for the help .

par

Ajouter un commentaire

Ajouter une réponse

Claudio Castillo sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 385