Réparez vos affaires Communauté Boutique

La troisième génération de la série des phablettes Samsung Galaxy Note, lancée le 25 septembre 2012. Identifiable au numéro de modèle N9005.

248 questions Voir tout

Options

Why won't my Galaxy Note 3 Power On?

I have a Note 3 N9005 that ran out of charge and died. Now it is almost completely dead even after charging continuously for 2 nights. I've already tried another battery. The screen just stays black like it's powered off and there's no charging or other LEDs (touch buttons at the bottom stay dark) but the phone vibrates only once after plugging in or pushing the power button. To get it to vibrate again, a power drain needs to be done. The battery is still charging because it gets warm when plugged in.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 2
1 commentaire

Hi iMedic, thanks for replying. I have already tried that. There's just nothing on the screen at all after the initial short vibration of plugging in or powering on.

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

I just learned about this. Try removing the battery, plugging in the charger, let it charge for a little bit, then putting the battery in, while its still on the charger. Hope that fixes the problem

Cette réponse est-elle utile ?

Oui Non
Indice 2

2 commentaires:

Sorry, just realized that I had to post the comment here, Hi iMedic, thanks for replying. I have already tried that. There's just nothing on the screen at all after the initial short vibration of plugging in or powering on.

par

Could try a hard reset. But you'd lose all your data. I'm starting to wonder if your phone is on, you just can visually see anything

par

Ajouter un commentaire

Options

Remove back cover

Remove all screws from mid frame

Carefully remove mid frame

On the right upper side (about even height with volume keys on side of frame) you'll see a gold looking cable connector (is the one that connects the LCD and digitizer)

Make sure it's snuggly connected.... this often pops out when dropped.

If your LCD display looks okay, phone vibrates and lights appear, this may be your problem.

;)

Cette réponse est-elle utile ?

Oui Non
Indice 2

1 commentaire:

Thank you, Holly!!!!!!!!!!!!!!!!!!!!!!!!! It worked!!!!!!!! Go eat some carbs openly!

par

Ajouter un commentaire

Ajouter une réponse

SMN9005 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 7,327