Réparez vos affaires Communauté Boutique

Furby was a popular electronic robotic toy resembling a hamster/owl-like creature which went through a period of being a "must-have" toy following its launch in the holiday season of 1998, with continual sales until 2000. Furbies sold 1.8 million units in 1998, 14 million units in 1999, and altogether in its three years of original production, Furbies sold over 40 million units.

84 questions Voir tout

Options

My Furby is not moving much and goes sleeping after 1 minute

My daughter's Furby just started to make this cracking noise with every word it says. Also the Furby's moving very quietly and not moving back and forward (at all).

Usually when the Furby goes to sleep, it will bend forward. Also the its ears (SOMETIMES) are not moving forward when going to sleep.

When the Furby is awake, it will last like 1 minute and its eyes will light off (and will go to sleep). It will only wake up if I shake it well.

I also noticed that will not react fast/properly when touching him.

The reset (or the change of personality modus which ONLY WENT GO 1 TIME)won't help.

I kindly ask for help. I speak also NL, ES and IT.

Thanx!

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 2
Ajouter un commentaire

3 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Block Image

My furby keeps falling asleep

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

There might be a loose wire. Also check the batteries. In the image that I linked there is a diagram that shows where the reset is located on your furby model.

https://static.wikia.nocookie.net/offici...

par

Ajouter un commentaire

Options

Checking the wire properly.. Some Wire burning and need to replace.. Becareful for replacement.. Very difficult.. Also checking. Dc motor running

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

The small 6V brushless DC motor went wrong.I’ve had similar issues to this as well. You can replace it with one from a PC DVD reader (the door opener motor). Shaft is smaller but it's ok, diameter is good. You’ll need a soldering gun.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Ciro Morante sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 9

Total : 1,362