Aller au contenu principal

Identified by the FCC ID 2ADCW-PLUS. Released in December 2014

6 questions Voir tout

Why Can't I Charge My Wireless Speaker Using USB Cable?

I have a wireless OontZ Angle Plus speaker. Speaker's battery is depleted of power and will not receive a charge when connected to a power supply via USB cable.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

3 Réponses

Solution retenue

When using your Oontz Angle Plus and you discover the device will not charge it is possible that the battery needs to be replaced after regular wear and tear. Therefore, you must disassemble the device and replace the battery using the troubleshooting page listed below.

There is also the possibility that the wire connecting the batteries have become loose and are not connecting properly. You will also disassemble the device and reattach the wires using the troubleshooting page.

Cambridge SoundWorks OontZ Angle Plus Troubleshooting

Cette réponse est-elle utile ?

Indice 2

1 commentaire:

Thank you Matthew

par

Ajouter un commentaire

I only had my OontZ 3 plus for 3 weeks and both my speakers will not charge up at all! This has to be defect!!

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

I had the same problem a few weeks ago and contacted Oontz and they sent me a replacement. I’ve only had this replacement for a handful of days and it’s happened again.

I don’t know.

Despite all the good reviews on the quality/fidelity of the speakers, this is a joke.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Farshad Mohebban sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 8

Total : 8,454