Rep: 1
2
I have been given the above model and upon looking inside I noticed that the temperature sensor was lose. I have had a quick look and cannot see where it is supposed to be attached.
It is attached to the Hard drive casing.
Can anyone help
Cette question est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
Remove the RAM and you will see the small black Receptacle that it plugs into.
Cette réponse est-elle utile ?
+1 ;)
Rep: 6,6k
19
14
10
Step 4, there you can see how the thermal sensor is placed.
Update:
I believe that the thermal sensor cable is connected to the underside of the logic board. See my comment for details.
I would remove the logic board from the case and look for a free connector on it's underside.
Cette réponse est-elle utile ?
Thank you for your answer. However it is not the answer I am looking for. As you will see from my original question the cable is attached to the drive casing. I need to know how and where to attach it to the base unit not the hard drive case.
Sorry, I misunderstood your question. If you take a look at the logic board guide it looks like the cable is seated on the underside of the logic board. I would take it apart and look for a mounting point that isn't used. If the cable fit's it is probably the one. Apple dosen't usually have unused connectors on their logic boards.
Dernières 24 heures : 0
7 derniers jours : 1
30 derniers jours : 2
Total : 1,842
