How to replace the motherboard in a dell XPS 8700 desktop?
Thank You! Anything I need to be on the look out that may be different? I have been as adventurous as just adding additional ram memory but that's as far as I done inside the hard drive!
Cette question est-elle utile ?
Rep: 31
2
You basically unplug everything and unscrew it. Just don't unscrew the riser screws underneath it from the case. You'll need those there for the next motherboard.
The port shield on the very back might be a little tricky but it should pop out (well, it pops inward).
You will need thermal paste to apply to the heatsink / CPU on the new motherboard, unless it comes pre-applied and you're not overclocking. If you're re-using the CPU or heatsink clean all the old thermal paste off with alcohol before applying any new paste. Be aware that thermal paste will stain clothes.
Also make sure the new motherboard you're getting matches the size of the previous one. There's ATX, mini-ATX, micro-ATX, etc. If you're just getting another of the same motherboard then this shouldn't be a problem.
Cette réponse est-elle utile ?
Rep: 1,1k
6
5
1
You take out everything connected to the motherboard and unscrew it form the case and remove it.....
Not that hard..........
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 1
30 derniers jours : 1
Total : 110
1 commentaire
I ordered the same dell part so I do appreciate your tips. I hope to get the part by the weekend. Thank you!
par Olga wallace