Aller au contenu principal

L'Apple iPhone 5s fut annoncé le 10 septembre 2013. La réparation de ce modèle est très similaire aux modèles précédents et requiert des tournevis ainsi que des outils pour faire levier. Disponible en version GSM ou CDMA, 16/32/64 Go de stockage et en argent, doré ou gris sidéral.

Questions au sujet de 3854 Voir tout

The brand new screen I installed has backlight banding issues

Hello,

I purchased and installed a new Full Assembly fix kit for my wife's iPhone 5s. It powered up well and install was a cinch but there are dark bands along the top of the screen that I'm assuming are related to the backlight. Any ideas? Do I have a connection that wasn't made well or is it possible the assembly kit was a lemon?

I have a picture of the banding that I will try to upload (not so sure I can make it work).

Thanks!

Adam

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 0

Commentaires:

For future reference, it's impossible for the backlight to cause black banding.

par

Good to know, thanks. Figured it was the backlight because I had an LCD tv with the exact same banding issue and according to Sharp it was a problem with the backlight.

par

Ajouter un commentaire

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

2 réponses

Solution retenue

The LCD cable is the easiest (and smallest) of the three ribbons to snap / click in place. I'd give it several attempts to get the cable connected and if its still showing banding you've either got a damaged connector or a bad screen. If it's an aftermarket screen I'd probably be tempted to go with the latter, but check your board... with a magnifying glass if needs to be. Good luck.

Cette réponse est utile ?

Score 1

Commentaires:

Thanks Mike. Giving this and the similar advice I got a shot tomorrow when my wife won't need her phone (in case something goes wrong).

Adam

par

Ajouter un commentaire
Réponse la plus utile

Hi

It could be a bad connection from either

only way to check this is to have another screen handy.

I always find if I get banding on LCD, its usually the connection teeth on the clip

get your best magnify glass out... check all the legs are strait and clean.

happy days

Ray

Cette réponse est utile ?

Score 1

Commentaires:

Thanks Ray. Getting into it tomorrow with your advice and that of the other poster. I figured it had something to do with a connection unless the screen was just a lemon. Will let you know.

Adam

par

Ajouter un commentaire

Ajoutez une réponse

adamfryer sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 144