Aller au contenu principal

Display power inverter pinout or voltage for each of 6 pins needed?

I have a broken LCD on my netbook. The LVDS cable correctly fits in the display for my iMac which was gutted when the logic board caps went bad.

I have tossed the logic board. I still have the display, the power supply and the inverter. I need to know the voltage that each pin on the inverter takes to power the back light on the iMac display directly from the power supply.

The following links may be helpful to someone who speaks French.

http://forum.macbidouille.com/index.php?...

[ http://users.skynet.be/fa835376/pas%20a%...]

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 3
Ajouter un commentaire

1 Réponse

Solution retenue

This is from an iMac G4 is this something that you are looking at?

The inverter has 8 pins in as described below.

Blue = 11.93v

Red = 11.93v

Blk = GND

Blu = GND

N/C

Yel = .2mv

Prpl = 3.262v

Orng= no voltage detected

Cette réponse est-elle utile ?

Indice 3

Commentaires:

Check this out and see if it will help you.http://dremmeljunkie.blogspot.com/2010_0...

Good luck

par

Also if you have the part number here you can look up the specs

http://www.jkllamps.com/index.cfm?action...

par

Ajouter un commentaire

Ajouter une réponse

Shane Nelson sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 8

Total : 6,409