Aller au contenu principal

Ce Power Mac G4 est muni de "Mirrored Drive Doors" qu'on pourrait traduire par "Porte de lecteur miroir".

80 questions Voir tout

No chime, black screen, fans all running?

I push the startup button on the computer, I hear a motor click or something, and then get no chime, no image, then after about 10 seconds all fans come on. The screen is an older 23" HD Cinema display. There is no paperclip hole in the optical drive to startup from OSX disk. I believe I lost the image when I reseated the Graphics card.

I've replaced:

(2) Hard Drives.

Battery

Logicboard

DP CPU

I've reseated or unplugged and plugged back in:

Computer speaker

RAM in all 4 slots

Graphics Card

Battery

I've reset the:

PRAM

Battery

Logic Board

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 2
Ajouter un commentaire

3 Réponses

Réponse la plus utile

This is about the eighth question on this same machine. Try starting up holding the mouse button down to eject the disk drive.

Cette réponse est-elle utile ?

Indice 1

5 commentaires:

Yes I know. It takes a while between ordering parts to try solution. I'm still considering upgrade, but want to get the computer working first. I have followed, pretty much everything suggested except starting up from OSX disk, which I can't do unless tray is open. Depressed mouse, pushed start up, tray did not open.

par

Took out optical drive, put OSX disk in tray, nothing. Hooked up firewire cable to Powerbook G4, not recognized as remote hard drive.

par

Good beginning +

par

I've never seen a full sized disk drive without an eject hole. What is the brand and model number?

par

I don't know the model, when I took optical drive cage out, there was an eject hole I could use, the way it was built with the hole pretty low on unit, the hole was covered by the frame of the (2) mirror doors. It is not the original optical drive, but has been working fine for several years.

par

Ajouter un commentaire

boot with only one chip of ram and try using different ram.

Cette réponse est-elle utile ?

Indice 1

2 commentaires:

I don't know the model, when I took optical drive cage out, there was an eject hole

I could use, the way it was built with the hole pretty low on unit, the hole was covered by the frame of the (2) mirror doors. It is not the original optical drive, but has been working fine for several years.

par

Took (3) RAM chips out, left (1) in, no change. Will locate a different RAM chip and see if that works.Will have to order, so will take a few days. Mr. Mayer also suggested this previously.

par

Ajouter un commentaire

Lots of discussion with this issue but no one ever say, "i have a fix".

Has anyone ever solved this problem?

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

R Michael Olexo sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 10

Total : 2,904