Aller au contenu principal

Modèle A1051 / disque dur de 4 ou 6 Go

Questions au sujet de 94 Voir tout

After replacing my Logic Board why does my Display not function?

Okay I'm looking for some help fixing my 1st Generation iPod Mini, I got it broken from a friend and when I first got it I plugged it into iTunes and got no response at all. I then brought a replacement battery from iFixit and installed that at which point the iPod did boot, I can only assume from some residual power left in the battery, and displayed the sad iPod icon and wouldn't go any further. I then took this to mean that the logic board was gone so I ordered and replaced the logic board but after I had put in the board and was connecting the display cable back to its relevant connector I noticed the connector on the new board was bigger than the old one but I simply reconnected the cable anyway and continued. Now when I connect the iPod to power I don't get any kind of screen response but I can hear the hard disk heads moving so there must be power in the board. I've begun to think that the display connector is the problem but does anyone have any insight with which they might be able to help?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 solution

Réponse la plus utile

You may have ordered a logicboard for a 2nd generation mini, which has a different LCD and connector. You'll have to now find an LCD for a 2nd gen mini, or find another 1st gen mini logicboard.

Cette réponse a-t-elle été utile ?

Indice 1
Ajouter un commentaire

Ajouter une réponse

Zagreus sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,164