Rep: 1
1
2
But when the door is open and laid flat.It will boot and you can hear the chime and you will see the startup icon.
I checked all the power supply cables and HD cables , But are all fine.
Is there a switch some where ? I thought it was the other way around ...Meaning when the door is open should not boot
and when door closed should
Please help.
Thanks,
Peymon Gorkani
Cette question est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
There is no door opened or closed switch. It should boot either way. Lay it on its left side and try starting then open the door and try. Please tell us the results. Also, when not starting do you get a light on the power button or any sounds or other lights?
Cette réponse est-elle utile ?
a good start +
Ok , No Chime sound when not booting , But yes the Switch light will blink and the light on Cinema 17 inch switch also lights on , But no display...
Ok I found the problem...There are 4 Holding screw sockets under the processor Board (Remove Heathsink then the board) Those were very loose and almost of the plate , Tighten those and reassembled and all is well now...Thanks
Glad your problem got solved.
Dernières 24 heures : 2
7 derniers jours : 3
30 derniers jours : 4
Total : 816
