Réparez vos affaires Communauté Boutique

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

2690 questions Voir tout

Options

Won't turn on after screen replacement

Ok I replaced my Iphone 6s screen today. At first before I took off the old screen the worked despite the digitizer and lcd being broken. So I took off the old screen and put the home button and everything back in the correct way. The new screen won't show anything. When I plug it into my macbook it asks for permission and to confirm it on the screen. Does that mean the phone is still on and I just can't see anything on the screen? I've tried the holding down the power button to reset it that didn't do anything. I've tried holding down power and home to no avail. I've tried shining a light at it to see if the backlight was messed up the screen doesn't show anything. Any other suggestions?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 11
1 commentaire

iphone 6s spacegray128gb won't turn on and charger for me

par

Ajouter un commentaire

6 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

If you cant see anything on the screen, even with the old screen on youve either blown a ferrite or the lcd driver chip on the motherboard, I fix these all the time from people that have done their own screen replacements and not disconnected the battery first.

Cette réponse est-elle utile ?

Oui Non
Indice 7

12 commentaires:

The old screen still lights up just it's cracked LCD and digitizer. So I'm beginning to think it's the new screen that is bad. I will replace it and post back to let y'all know if it was or not.

par

If the new screen isnt working, just by deduction you have a bad screen if the old screen still works. First rule of problem solving, try it with a known working part, if the part works, the problem is the other part.

par

how do you fix it?

par

well, the screen works perfectly on another 6s.. but it won't work on the one i'm doing the replacement on..

par

Have you checked that the phone is turned on successfully by plugging it into a computer and checking iTunes to see if it detects it as 'iPhone locked with passcode' / 'Trust this device to computer'?

par

Voir 7 commentaires en plus

Ajouter un commentaire
Réponse la plus utile

Options

I had the same problem and was about to scrap the replacement screen but first I tried disconnecting the battery connection again and holding the power button down for twenty second. When I reattached the battery and held down the power button it fired right up. Funny thing was that the old screen would work without the whole process of disconnecting the battery when I reconnected it in an effort to see if the new screen was faulty. This may just be something to do with the seven plus since this has never happened on other models.

Cette réponse est-elle utile ?

Oui Non
Indice 20

18 commentaires:

you are the man. I was down to getting ready to scrap the screen as well

tried what you said and boom it worked

par

Man thanks! My phone now working! I was scared that my LCD connector in broken.

par

It would have been wonderful had the directions that came with the replacement screen mentioned to disconnect the battery before starting the removal of the old screen. This method worked perfectly for me! Thank you for the solution.

par

You're a champ mate. Thought I &&^&@@ my phone but this 'fixed' it right away.

par

!&&* yes you saved me!!!

par

Voir 13 commentaires en plus

Ajouter un commentaire

Options

This happens sometimes, with newer iPhones. Disconnect everything, including the battery. Discharge the phone by holding down the power button, after you've done this. Then reconnect everything and power it back on. Hopefully you haven't damaged anything during the initial repair

Cette réponse est-elle utile ?

Oui Non
Indice 6

7 commentaires:

Tried that nothing on the screen iTunes recognizes it when hooked up just nothing from screen. Old LCD lights up even though cracked. So any chance it's just this screen or what? When I call it it doesn't ring or anything but iTunes still detects it.

par

When iTunes recognises it does it say it is in recovery mode? If yes then sounds like iOS 10 decided to brick itself like usual and requires either an update or restore to fix.

A black screen lit up may indicate the phone is stuck in DFU recovery mode.

par

Yes it detected recovery mode when I put it into recovery. I can't tell if it's in dfu mode as I can't see anything on the screen it's like there's no light on the screen at all. So I would have to update it to see if that corrects the problem?

par

Okay, it's 99% likely a defective screen.

par

Yep. Get a new screen

par

Voir 2 commentaires en plus

Ajouter un commentaire

Options

Solved: as previous posters have mentioned, if the screen will not turn on after servicing the phone, disconnect the battery connector if you haven’t already. While still off, hold the power button down for 10-20 seconds, let go, reconnect battery and power the phone on. This works for many. If that still doesn’t work, as in my case, reconnect all connectors, and plug phone into a charger and then power on. This “fixed” mine, even though it had 70% charge at the time of repair. Good luck!

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

my iphone 6 turns on with old screen it was cracked so replaced it and also replaced the battery to be sure . I put the old screen back on and tried to hard restart and the screen came on and showed the download screen. so i turned it off and put the new screen back on and when i got the connections on i turned it on and the screen turned on so shut it off again and finished putting it back together and now it won't turn on again even trying to hard start it again I hear it on itunes but it shows nothing

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

This also works on the 8. Too bad I already replaced the phone with the 12 before I saw this thread to unplug the battery.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

I had my screen replaced because it was cracked but now when the phone rings it locks up my phone. I have to wait until the battery is dead before I can even turn it off. I charge it and it works until it rings. Does anybody know what could cause this?

par

Ajouter un commentaire

Ajouter une réponse

Steven sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 11

7 derniers jours : 71

30 derniers jours : 309

Total : 81,516