Rep: 25
1
I need to replace the LED PCBoard on my electric pressure cooker as the LED display is broken. I managed to get the spare part from an appliance spares place, but now I have no idea where to open the Pressure cooker (easiest way), to swop out the old board for the new one. PLEASE HELP :-) - Cuisinart Electric Pressure Cooker CPC-600 or AEG/Electrolux EPC600.
Cette question est-elle utile ?
Rep: 685,4k
3,4k
1,1k
2,6k
I just can't find any teardowns or repair guides on this. These people sell the parts and have a toll free number and may be able to assist you: http://www.ereplacementparts.com/cuisina...
Cette réponse est-elle utile ?
You have to undo all the screws from inside and slide the outer case off there is a screw underneath a label and the front panel peel off label there should be to screw underneath at the top when you have done that there are 4 screws holding the panel on for the led circuit board I have done one my self so please put all the screws in a safe place as I did so you don't lose them I hope this helps you
Cette réponse est-elle utile ?
I hope this helps you out
where can you get the led display Pressure king pro 5l
Dernières 24 heures : 3
7 derniers jours : 7
30 derniers jours : 30
Total : 3,173
1 commentaire
Where did you get the LED board?
Thanks!
par Luis